Grip Strut Stair Tread 200*600mm With Hot Dipped Zinc Coated
Grip strut grating can made out to stair tread, main used in poor
working condition, such as ice, snow or rain outdoor, and oil,
moist indoor. Grip strut start tread is good anti-skid, snow or ice
will fall off from diamond hole, oil or water is flow away, our
shoes touch with teeth around hole, we have strong sense of safety.
Width 200mm, length 600mm is common size,it also can be customized
base on your needing.As normal, length sides are bent 90 degree,
height is 50mm, and hold back 25mm. It can enhance the strength.
Hot dipped zinc coated grip strut stair tread in outdoor or indoor,
for vehicle, machine, construction etc.
Grip strut stair tread with hot dipped zinc coated is good
|Name||Grip strut stair tread|
|Application||Outdoor and indoor construction,vehicle,machine etc.|
|Material||Carbon steel Q195,SPCC|
|Surface treatment||Hot dipped zinc coated|
1, hot dipped zinc coated is 80-100μm, about 300g/sq.m, with good
anti-corrosion in poor working condition.
2, long working life, low maintenance cost.
3, antiskid effect is best, there are 14 teeth around one hole,
getting hold of the shoes sole when you stand in walkway.
4, safety factor is good, grip strut grating is good at work in bad
weather such as snow, ice, rain etc.
5, protection workers, cutting down work injury.